Wind loads at height
Wind speeds above 12 m/s stop crane work. The climbing assembly stays locked on the wall and work can continue.
SOLUTION 03 High-Rise Climbing
High-Rise Climbing Solutions
Self-climbing formwork and protection systems for super-tall core walls, high-rise towers, and complex vertical structures. TECON climbing solutions integrate formwork, working platforms, and weather protection into one automatic hydraulic system that eliminates crane dependency above 100 metres.
Overview — TECON High-Rise Climbing Systems
TECON high-rise climbing formwork systems are engineered for buildings where conventional crane-dependent methods become inefficient or unsafe. Above 100 metres, wind loads, crane cycle times, and fall protection requirements make a self-climbing system the only practical choice.
Our climbing systems combine formwork panels, working platforms, hydraulic lifting units, and weather protection into a single integrated assembly. Once locked on the core wall, the system climbs automatically without crane assistance.
200+ m Crane-free above this height
3–5 days Typical floor cycle
12 m/s Wind speed tolerated
Up to 80% Less crane time
Applications & Typical Configurations
Standard climbing formwork configurations by building type.
| Application | Dimensions | Recommended System | Key Advantage |
|---|---|---|---|
| Residential high-rise | 30–60 storeys | TSC100 + HETO Frame | 200–400 mm core |
| Commercial super-tall | 60–100 storeys | TSC100 + climbing unit | 400–600 mm core |
| Hotel / mixed-use towers | 40–80 storeys | TSC50 / TSC100 | 250–500 mm core |
| Bridge pylons | Up to 150 m | Climbing formwork | Variable section |
Engineering Challenges Addressed
TECON climbing systems are engineered for the conditions found above 100 metres.
Crane cycle limitations
Above 40 storeys, a single tower crane cycle can take 15–20 minutes. Climbing removes that wait from the floor cycle.
Core wall schedule
Core walls must stay ahead of the slab frame. TECON climbing completes one floor every 3 to 5 days.
Fall protection and debris
Working platforms and the protection screen move with the formwork, so edge protection is always in place.
TECON Products for Climbing Solutions
Two primary product lines cover climbing formwork and protection.
CLIMBING FORMWORK
TECON Climbing Formwork
Hydraulic self-climbing formwork system. Integrates with HETO Frame panels. Crane-free climbing, 3–5 day floor cycle.
View Product
PROTECTION
Self-Climbing Platform SCP
Full-height protection screen with hydraulic climbing. Fall protection, debris containment, and wind shelter. Climbs with the formwork.
View ProductKey Features & Benefits
Why TECON climbing systems are the preferred choice for super-tall construction.
Crane-Free Hydraulic Climbing
Automatic hydraulic lifting removes crane dependency above 100 metres. Floor cycles stay predictable.
Integrated Weather Protection
Enclosed working platforms keep crews productive in wind and rain on moderate-wind days.
One-Piece Integrated System
Formwork, platforms, and protection climb as one unit. No separate screen assembly between floors.
Full-Height Safety Compliance
Edge protection is present at every level and contains debris across the working height.
Related Projects
TECON climbing formwork in action on completed high-rise projects.
Request a Quote for Climbing Solutions
Tell us your building height, core wall thickness, and project schedule. Our engineering team will recommend the climbing system and provide a quotation within 24 hours.
- Free engineering assessment
- Tailored system proposal
- Factory-direct pricing
Project details