High hydrostatic pressure
Tall pours generate lateral pressure up to 80 kN/m². HETO Frame and Base 20 are rated for that load.
SOLUTION 01 Wall & Column
Wall & Column Formwork Solutions
Engineered vertical formwork for walls, columns, and shear walls in residential, commercial, and industrial construction. TECON offers HETO Frame, Base 20 Wall, and column formwork for heavy-duty vertical work.
Overview — TECON Vertical Formwork Systems
TECON wall and column formwork systems deliver over a decade of engineering experience in residential, commercial, and industrial construction. The universal clamp fits all panel widths from 0.6 m to 6.0 m, reducing inventory by up to 40%.
With pinned connections and high-density plywood faced panels, these systems deliver forming speeds 30% faster than conventional methods while maintaining ±2 mm panel alignment.
80 kN/m² Rated for high-pressure pours
0.6 – 6.0 m Panel widths and custom heights
3 – 5 days Wall and column floor cycle
Up to 40% Fewer panel types stocked
Applications & Typical Configurations
Recommended configurations by project type.
| Application | Dimensions | Recommended System | Key Advantage |
|---|---|---|---|
| Commercial / office walls | 2.8–3.5 m | HETO Frame | Universal clamp for all widths |
| Industrial columns | 0.3–1.2 m | Column Formwork | Adjustable 50 mm increments |
| Heavy-duty volume | Up to 6.0 m | Base 20 Wall | 80 kN/m² pressure |
| Architectural fair-face | Any height | HETO / Base 20 | Smooth, ±2 mm joints |
Engineering Challenges Addressed
Common wall and column conditions solved by TECON systems.
Tight construction schedules
Wall-ready buildings need one floor cycle every 3–5 days. Pre-assembled panels cut on-site fabrication.
Site inventory complexity
Multiple panel widths increase stock. The universal clamp cuts panel types needed by about 40%.
Architectural concrete finish
Fair-face walls need ±2 mm alignment. Plywood-faced frames deliver a consistent joint.
Variable wall thickness
Thickness changes along a wall. Panel length adjusts without a new fabrication run.
TECON Products for This Solution
Product lines for wall and column applications.
WALL
HETO Frame Wall Formwork
Steel frame and universal clamp. 80 kN/m². Reduces inventory by 40%.
View Product
Key Features & Benefits
Why contractors specify TECON vertical formwork.
Universal Clamp
One clamp fits all HETO widths. Faster assembly. 40% fewer parts.
80 kN/m² Capacity
High walls and basement walls pour in one lift. Safe for pumping.
Tool-Free Connections
Pinned connections close in about 15 seconds. 30% faster setup.
Re-use
Plywood-faced frames are specified for 100+ reuses.
Interchangeability
Shared clamps across widths. Systems stay compatible.
Durable Frame
High-density plywood on a steel frame. 10+ years in service.
Related Projects
TECON wall and column systems in action.
Request a Quote for Wall & Column Formwork
Tell us your project requirements. Our engineering team will recommend the system.
- Free engineering assessment
- Tailored system proposal
- Factory-direct pricing
Project details