The building formwork project is a temporary support structure made according to the design requirements, so that the concrete structure and components are formed according to the specified position and geometric dimensions, maintain their correct position and bear the self-weight formwork of the building and the external load acting on it. Hollow plastic formwork is a common type. The purpose of the formwork project is to ensure the quality and safety of the concrete project, speed up the construction, and reduce the cost of the project.
(1) Look at the trimmings around the building formwork, and look at its pressure density. The good ones are flat and the bad ones are easy to break.
(2) Look at the glue used for building formwork, the bad one is urea-formaldehyde glue, the good one is waterproof melamine. The good formwork is clean and bright and the hand feels fine and smooth, while the poor formwork is dark and not bright.
(3) Look at the pros and cons of the materials used in the building formwork.
(4) Look at the pressure of the building formwork: when you go to the factory for inspection, go to the hot press to see how much pressure it presses. Generally, hot press of a factory presses 9mpa to 20mpa. The surface of the formwork pressured with a large pressure is bright and smooth, and the flatness is uniform, and vice versa, the surface of the formwork pressured with a small pressure will be dark and rough with unevenness.
Suzhou TECON Construction Technology Co., Ltd provides a wide range of formwork and scaffolding products and solutions for global customers. If you have any needs, please feel free to contact us.